The range of process speed in nonwoven production line is mainly 5m/min~20m/min. According to the specific process, the use of non-woven fabrics production line is also different frequency. In the 50Hz under the motor of the main constant torque output, in order to protect the work of high and Low speed section of normal operation, in the selection of the capacity of the inverter, should increase the AC frequency motor power.
In the unit, static and dynamic performance are equally important. By optimizing the corresponding parameters such as adjusting the inverter, the static performance can be satisfied with the comparison of the field measurements and the theoretical comparisons, and the adjusting parameters in the PLC program are calibrated to eliminate the static deviation caused by the objective conditions in the theoretical calculation. So, the dynamic synchronization is also very important, the significance of the main refers to the speed of the unit at the lifting of the process of the consistency of the midline.
Heterogeneous automation has now become a bottleneck in modern manufacturing engineering technology, especially for information integration in large system integration projects. Whether in the enterprise construction stage, or after the long-term development stage of investment, choosing the right and obvious advantages of equipment is a correct choice. With the continuous development of China's science and technology, China's corresponding products have been enriched and developed, I believe that in the near future, the textile industry will be rapid development.